User Manual of Network Zoom Camera
38
5.2
Basic Event Configuration
Purpose:
This section explains how to configure the network camera to respond to alarm events, including
motion detection, video tampering alarm input, alarm output and exception. These events can
trigger the alarm actions, such as Send Email, Notify Surveillance Center, etc.
For example, when motion detection is triggered, the network camera sends a notification to an
e-mail address.
On the event configuration page, click to show the PTZ control panel or click to hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on different camera models.
5.2.1
Configuring Motion Detection
Purpose:
Motion detection is a feature which can trigger alarm actions and actions of recording videos
when the motion occurred in the surveillance scene.
Steps:
1.
Enter the motion detection setting interface:
Configuration > Event > Basic Event > Motion Detection
2.
Check the checkbox of the
Enable Motion Detection
to enable this function.
You can check the
Enable Dynamic Analysis for Motion
checkbox if you want the detected
object get marked with rectangle in the live view.
3.
Select the configuration mode as
Normal
or
Expert
and set the corresponding motion
detection parameters.
Normal
