V. Operation
Note: Before using the machine, please make sure the power source you will use
is in accordance with the specifications shown in this manual. Before inserting
the plug into the socket, make sure the machine’s roll shaft and the snow
thrower’s rubber plates are all fixed firmly with screws, and the rubber plates are
facing to the correct direction. Perform a test run to ensure that the rotor turns
feely.
Securing the extension cord
1. For safe and efficient use of your snow thrower, use only a UL-rated or CSA
extension cord recommended for outdoor use.
2. To prevent the extension cord from disconnecting during use, tie the extension
cord into a loose knot on the top right side of middle frame before connecting the
plug in the switch cord socket of the snow thrower.
Electric shock may cause SEVERE INJURY or DEATH. Heed these warnings:
●
Do not allow any part of snow thrower to make contact with water
while powered on. If the appliance becomes wet while turned off,
wipe dry before starting.
●
Use only a UL-rated or CSA-rated extension cord for outdoor,
all-weather use.
●
Do not touch the appliance or its plug with wet hands or while
standing in water. Wearing rubber boots offers some protection.