behind the unit in the normal operating position.
1. Remove the screws from the left panel of the snow thrower.
2. Lift the belt tension and roll the large belt off the big pulley.
3. Replace the large belt by following instructions in reverse order.
Storage
1.
Allow the engine to cool and clean the snow thrower before storing or
transporting. Be sure to secure the unit while transporting.
2. Disconnect the extension cord from the snow thrower.
3. Inspect the extension cord closely for signs of wear or damage. Replace it if it
is worn or damaged.
4. Inspect the snow thrower carefully for worn, loose, or damaged parts. Check
connections and screws and tighten if necessary.
5. Store the unit, along with the disconnected extension cord, in a locked, dry
place out of the reach of children to prevent unauthorized use or damage.
Cover loosely with a tarp for added protection.
