ensure that these are connected and properly used. Use of these devices can reduce
dust-related hazards.
4) POWER TOOLS USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate from which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that can
not be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts, and any other conditions that may affect the power tools operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could result in a hazardous situation.
5) SERVICE
a) Have your power tools serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tools is maintained.
ADDITIONAL SAFETY RULES FOR SNOW THROWER
●
Know your tool. Read owner’s manual carefully. Learn its applications and
limitations as well as the specific potential hazards related to this tool.
●
Do not operate this unit when tired, ill or under the influence of alcohol, drugs,
or medication.
●
All guards and safety attachments must be installed properly before using the
unit.
●
Inspect the unit before use. Ensure the parts are installed correctly and
secure.
●
Clear the area to be plowed before each use. Remove all objects such as
rocks, broken glass, nails, wire, or string which can be thrown or become
entangled in this tool.
●
Keep the area of operation clear of all persons, particularly children and pets.
●
Avoid dangerous environment. Don’t use power tools in damp or wet
locations or expose to rain. Keep work area well lit.
●
Keep work area clean. Cluttered areas and benches invite accidents.
●
Be cautious to avoid electric shock. When using the machine keep your body
away from different ground terminal of power (e.g. upper and lower water
pipes, outer frame of heating equipment, microwave oven, or in a place that is
locked.
●
The machine should be stored carefully and safely in a dry environment when
not used, far from the reach of children, or in a place that is locked.
●
Please do not use the machine in any purposes other than it is designed for,
otherwise, it may cause mechanical defaults or serious damage or injuries.
●
Special care should be drawn to the following issues when using this machine:
operation methods, procedures, surroundings, and environment states, etc.
●
When using this machine, the user should be cautious about the nearby
status or changes: The user should constantly observe the position and
movement of other people, nearby window, vehicles, obstacles, etc. Exercise
caution to find any small piece of rocks or other articles in the snow to avoid