background image

9

CARE AND MAINTENANCE

Use only a soft and dry cloth to clean the clock. Dust and 
particles contained in the cloth could scratch parts. Do not 
use any kind of cleaning products to clean the clock. It is 
recommended to keep the clock distant from any source 
of heat or vibrations. To preserve the longevity and func-
tionality of TriPod, do not permanently expose the clock 
to direct sunlight or in a humid/dusty place.

Our clocks are developed to ensure optimal accuracy and 
reliability. It is well accepted for a fine mechanical clock to 
have a few seconds’ variation per day and our clocks are 
set so as not to delay. However, if you should notice a big-
ger variation, please contact an authorized dealer who will 
advise you, or a L’Epée 1839 technical support center 
which will proceed with the necessary adjustment.

As for all horological pieces of art, it is recommended to 
periodically service your clock. A mechanical masterpiece 
requires fine oils for the lubrication of the movement. 
These oils deteriorate over the years. We therefore advise 
having the movement overhauled every 5 years. Be aware 
that the optimal period between servicing times can vary 
depending on the surrounding environmental conditions.

It is recommended to hold TriPod only by the legs, the 
dome or the base. Avoid touching the glass, movement 
and the glass spheres.

Summary of Contents for LEpee 1839

















Reviews: