Litho in U.S.A. 1-2015
SEAMER SPECIFICATIONS
AND MAINTENANCE
Seamer will seam 50 TO 60 F.P.M. depending
on gauge of panels and pitch of roof.
Seamer has 10 or 15 amp., 120 v., AC/DC
motor.
Seamer should be cleaned with a nonflam-
mable solvent, often, to prevent a build-up of
galvalume or sealant on the rolls.
DO NOT
SPILL CLEANING SOLVENT ON ROOF PAN-
ELS. THIS WILL VOID THE WARRANTIES
ON THE ROOF PANELS FINISHES.
Any adjustments, maintenance, modification, or
repair not otherwise specifically set forth in this
manual, must be conducted by MBCI.
If seamer motor should stop suddenly, check
reset button located on the side of the electri-
cal box on top of seamer motor.
CONTINUED
RESETTING OF MOTOR COULD BE INDICA-
TIVE OF LOW VOLTAGE AND WILL CAUSE
DAMAGE TO SEAMING MACHINE.
Check
size and length of electric cords. If problem
still persists, use an alternate power source.
SHIPPING INSTRUCTIONS
Replace the seaming machine in the box. All
items should be clean and in proper working
condition. A $50 minimum charge will be
assessed for equipment improperly cleaned or
damaged.
Return seamer as soon as you are finished.
For seamer pick-up, please call FedEx Freight
at 877-918-6012 extension #5091070.
If possible, call the shipper the day before you
are finished.
SEAMER SHIPPING WEIGHT — 147 LBS.
HAND CRIMPER SHIPPING WEIGHT - 42 LBS.
Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. In a con-
tinuing effort to refine and improve products, MBCI reserves the right to discontinue products at any time or change specifica-
tions and/or designs without incurring obligation.
To insure you have the latest information available, please inquire or visit
our Web Site at http://www.mbci.com.
Application details are for illustration purposes only and may not be appropriate for all
environmental conditions, building designs, or panel profiles. Projects should be engineered to conform to applicable building
codes, regulations, and accepted industry practices. Insulation is not shown in these details for clarity.
If there is a conflict
between this manual and the erection drawings, the erection drawings will take precedence.
Houston:
877/713-6224
Adel, GA
888/446-6224
Atlanta, GA
877/512-6224
Atwater, CA
800/829-9324
Dallas, TX
800/653-6224
Indianapolis, IN
800/735-6224
Lubbock, TX
800/758-6224
Memphis, TN
800/206-6224
Oklahoma City, OK
800/597-6224
Omaha, NE
800/458-6224
Phoenix, AZ
888/533-6224
Richmond, VA
800/729-6224
Rome, NY
800/559-6224
Salt Lake City, UT
800/874-2404
San Antonio, TX
800/598-6224
Tampa, FL Sales Office
800/359-6224
