8
Schematic diagram of installation completion
Limit screw
Step 4 Assemble the adjustment seat core and the adjustment handle core
Step 5 Assemble the bottle holder
Accessories: Seat/Handlebar Height Adjustment Elastic Knob(2pcs), Allen wrench(4#)
Accessories: bottle holder, cross recessed pan head screws M5*16mm (2 pcs), cross screwdriver
Take the bottle holder, cross screwdriver, cross recessed pan head screws (2 pcs), and fix it on the
main frame. (as the picture shows)
Finally, you must reconfirm that the installation is correct according to the manual before you use it.
⑫
⑫
⑫
⑨
Take an Allen wrench to remove the limit screw, take the assembled adjustment seat core, adjustment
handle core and elastic knob, and re-fasten the limit screw on the instrument with an Allen wrench.
Tighten the adjustment knobs at last.
Attention: Choose the suitable position and make sure the adjustment knob is inserted into the
hole.(There should be “pop” sound when the knob is inserted into the hole)
⑩
⑩
④
④
⑧
