mbl 9011 | mbl 9008 A | mbl 9007
1
Important Information!
Attention
: The unit must be protected against humidity, vibration and excessive dust and should not be exposed to
direct sunlight or intense sources of heat (radiators). Do not operate the unit in the immediate vicinity of sources
of electrical interference (e.g. fluorescent lamps or electric motors). The permitted operating temperature is 10°C
up to 40°C (50°F up to 104°F). Avoid extreme variations in temperature.
Do not operate the unit under condensation! After exposure to low temperatures allow the unit to warm up for
at least three hours.
Do not open the unit and do not make any alterations to it.
If you wish to place the unit on a rack, you must ensure sufficient ventilation. Minimum clearances of 10 cm (4 inch)
above the unit and 2 cm (0,8 inch) on all sides must be observed. The ventilation openings of the unit must not
be covered with tablecloths, magazines, curtains and the like in order not to interfere with the heat dissipation.
Make sure that no fluid-filled vessels (glasses, vases…) are put on the device to prevent water from ingressing the
device, and the device is never exposed to splash water.
NEVER
switch power amplifier on when no speaker is connected!
KETI, CE-Marking
This product conforms to the requirements of the EMC directive and low-voltage directive. Your MBL component
complies with the household power and safety requirements in your area.
Warranty
Please pay attention to the details given in the warranty card which accompanies the unit. Warranty is only issued,
if you send back the warranty card.
