BLAST CHILLERS AND FREEZERS
INSTALLATION MANUAL n° 6CE648070NI
–0712
Page 5
The sketch shows the
"12/6 model"
assembly
2. NAMEPLATE
The nameplate is to be found fixed on the bottom right of the cabinet.
For all correspondence relating to your equipment remember:
- The unit code (Type)
- The serial number (N° SERIE)
- The date (Date)
The main characteristics are repeated on a label fixed to the left hand internal panel.
3. INSTALLATION
3.1 GENERAL REQUIREMENTS
The installation, any repairs or alterations to this equipment should be undertaken by
qualified specialists according to good practice.
3.2 HANDLING
Handling must be carried out with adapted lifting devices.
If you have to carry the appliance, use the pallet of origin and in no case can it be
stacked on other appliances.
When transferring the appliance and in the absence of its pallet, the appliance must be
carried and not pulled.
3.3 UNPACKING AND INSTALLATION
3.3.1 UNPACKING
After having cut strapping (only for 10- and 13-level assemblies), remove the plastic film
with cardboard corners and the polystyrene protective bands.
View of packed equipment
Water drip tray
Adjustable
screw jack
Wooden pallet
