73
14. Product specifications
14.1 Specifications
Stations(bins)
10 stations(bins)
Paper Feed
Roller separator system
Station(bin) Capacity
1.1"[approx.
350sheets of 17-lb bond (64g/
੍
) paper]
Paper Transport
Belt roller system
Stacking Capacity
2.6"
>
approx. 880 sheets of
17-lb bond (64g/
੍
) paper]
Paper Stacking System
Right and left index system (20° apart) or straight stacking
Collating Speed
40-70 set/minute (A4 size paper long-edge feeding)
Paper Size
Max.
12.9"
18.5"
(328
469 mm
)
/ Min.
3.8"
5.9"
(95
150mm)
A3SR A3 B4 A4 B5 A5
Paper Weight
52 to 157 g/
੍
(In case of 157 g/
੍
, up to A3 size can be used.)
Detection of Station in
use
Stations in use can be checked by trial feed with the CHECK key.
Detection
of
Paper
Weight
Paper thickness on each station can be checked by trial feed with the CHECK key.
Feed Error Detection
Empty feed, no paper, paper jam, double feed (detection of paper thickness with
photo-electric sensors)
Other Detection
Stacking table full, paper eject jam, back door open/close status, (Staple cartridge empty
and paper jam detection when optional stapler-puncher is mounted).
Four-digit display on the operation panel counter, addition/subtraction (preset)
switch-enabled
Additional Features
- Automatic elevation of paper feed table
- Alternate collation (Neighboring two stations can be used together for the same
sheet/page.
- Insertion of partitioning paper (according to the designated set)
- Programmed insertion of cover paper (loading covers on the top station and back covers
on the bottom: Good for collation for system-notebook, chits, etc.)
- Three levels of paper feed pressure (four levels for Station 1 and 10, and three levels for
Station 2 to 9)
- Three levels of separator pressure (Fourth level built-in while not displayed on the
tablet: Used for special papers)
Power Source
100-240V 50- 60Hz <2.0-1.2A>
Power Consumption
Maximum 120W
Dimensions
W27.2"
D 21.3"
H 41.8" (W690
D540
H1,060 mm)
Dimensions
(with anti-fall plate)
W34.9"
D21.3"
H41.8" (W885
D540
H1,060 mm)
Weight
176.4 lb (79.7 kg)
Specifications are subject to change without prior notice for the sake of improvement.
Summary of Contents for FC 10 PLUS
