FUNK CROSS
USER MANUAL
p.18
3.6 Battery
The assistance system of the pedal-assisted bicycle, to work, needs
the presence of the power battery.
Specifically, the battery is removable, so you can take it out for
maintenance actions or when you want to store the vehicle.
3.6.1 Battery charge status
You can view the battery charge status directly on the assistance
system management display.
In case that the battery is disassembled from the vehicle or you want
to see the state of charge without turning on the assistance system,
in the upper part of the battery there is a button (Ref.O – Figure 8) that
allows, through a LED light of different colors (Ref. P – Figure 8), to
display the state of charge.
CHARGING STATUS LED:
RED LIGHT 0– 25%
GREEN LIGHT 25- 75%
BLUE LIGHT 75– 100%
FIG. 8
3.6.2 Battery removal / installation
To remove the battery make sure that both the assistance system and the battery are turned off and proceed as it follows:
1. Insert the battery lock/unlock key into the battery lock at the top right of the frame near the handlebar and turn the keys
clockwise. (Ref. Q – Figure 9)
2. Holding the key rotated, unhook the battery and lift it (Ref. 2 – Figure 9)
3. Take out the battery completely, taking care not to hit the frame.
FIG. 9
1
2
3
