8
5. Functions
1) Operation Panel
(1) Counter
(i) In
Count Up
mode, the panel displays the number of copies counted.
In
Count Down
mode, the panel displays the value calculated by subtracting the
number counted from the preset value.
(ii) When changing the paper size, the panel displays the change made within the
range of +/- 0.2 inch for four seconds.
When the paper size is set to
Free
, the panel displays the full length for four
seconds.
(iii) In side binding mode, the panel displays the adjustment made within the range of
0.30 inch to 0.60 inch for four seconds.
(iv) In auto mode, the panel displays the detection time within the range of one to five
seconds for four seconds.
(v) The value may be increased or decreased by pressing the positive (+) or negative
(-) key.
(2) Paper Size
(i) Choose the original paper size from the following options: LETTER, LEGAL,
LEDGER, ARCH B, SUPER B, and FREE.
(ii) For
FREE
, set the original paper length within the range of 5 inch to 19 inch
(iii) Press any of the switches twice to increase or decrease the paper length by up to
+/- 0.2 inch. This is fine adjustment for each preset paper size.
(3) Paper Feed
(i)
Auto
Mode: Press the auto switch. The product will automatically start when the
optical sensor detects the paper that is fed.
Press the auto switch twice to change the detection time, using the positive (+)
and negative (-) keys to change the value.
(ii)
Manual
Mode: The product starts when the Start switch is pressed.
(4) Count Mode
(i) Press the
▲ key for the Count Up mode, or the▼ key for the Count Down mode.
(ii) In the Count Down mode, specify the value in advance, using the positive (+) and
negative (-) keys to change the value.
(iii) No value exceeding three digits can be displayed or specified.
(2)
(3)
(5)
(1)
(4)
(6)
(7)
(8)
