19
5. For adjusting the tension of the timing belt, fix the bracket on the paper feed motor side at the
center, and adjust the position of the bracket on the opposite side and fix it at the position
where the timing belt is tense.
(If it is necessary to apply force to manually move the paper feeder, the tension level is too high
and needs to be lowered.)
8. After the adjustment, take the reverse steps to reassemble the product.
List of Components
No.
Name
Qty.
411
Lower Bracket
2
206
Main Unit Bottom Plate
1
205
Stay
1
300
Bracket
1
299
Timing Belt
1
298
Bracket
1
113
Paper Feed Motor
1
M3x6
Small Pan Head Screw
3
M4x8
Small Pan Head Screw
14
Set the tension to the level at which the two parts of the timing belt do not come into contact
when they are gently pinched between two fingers.
Use this screw for adjustment.
Fix it while pulling it outwards.
300 [Bracket]
299 [Timing Belt]
Use this screw (M4x8) for the adjustment.
If the adjustment cannot be fully
completed with the lower pulley,
loosen this screw to change the
bracket position.
298 [Bracket]
113 [Paper Feed Motor]
