KAIROS
USER MANUAL
p.15
3.7 On-board computer mode
The on-board computer is able to adapt to different use scenarios, from switching to sports use.
To move between the available display modes, briefly press the "POWER" button (Ref. H - Figure 5).
3.7.1. “RACE” MODE
It is the fifth screen in the home section.
In this screen the values in watts (w) of the motor power and cyclist power are expressed in full. (Figure 4.2) This mode of
use is addressed to experienced users, and to a sporty use of the e-bike. (Figure 4.2)
1-
POWER
Indicates the instantaneous power de-
livered by the motor in watts (w).
2-
CYCLIST POWER
Indicates the instantaneous power ex-
pressed by the cyclist in watts (w).
3-
POWER DISPLAY
Graphic display of the upper bar power:
engine power lower bar: cyclist power.
4-
ENERGY CONSUMPTION
Indicates the average energy consump-
tion in watt-hours per kilometer (Wh/
km), calculated since the last zeroing.
This data allows to adjust the level and five of
the consumption of the eBike according to the
need.
By calculating the ratio between this data and
the capacity of the battery, the exact possible
mileage data for each charge is obtained.
5-
CADENCE
6-
CURRENT SPEED
7-
SERVICE LEVEL
battery
capacity
=
÷
average
consumption
Passable
km
FIG. 4.2
