Sprint5000HCS-USA.doc3.doc Page
2
01/05/2002
1 INTRODUCTION
•
The Sprint 5000 Bookletmaker centre staples and folds to make booklets between 4” x 5
½
“
and 8
½
“ x 11” with up to 80 pages. On each cycle of the machine one set of sheets is stapled
and the preceding set is folded and stacked on the conveyor belt.
•
It is also possible to edge and corner staple up to 20 sheets.
•
The machine can either be hand fed or placed on-line to one of the various desktop vertical
collators, using a KAS conveyor/ jogger link. A stand is also supplied to carry the collator so
that it is the correct height for feeding into the Bookletmaker.
•
The Sprint 5000 is a floor standing machine fitted with sturdy castors and an integral conveyor
which can be folded up in order to occupy minimal floor space when not in use.
•
This model has five stapling positions to which the stapling heads can be moved according to
the size of paper. The right hand outside position is for corner stapling.
•
A Staple Out Detector is fitted to each of the stapling heads, and the Bookletmaker will stop
when the stapling head runs out of staples.
2 SPECIFICATION
INPUT CAPACITY:
Booklets
20 sheets of 20 lb bond
Pads
20 sheets of 20 lb bond
SHEET SIZES:
Booklets
5
½
“ x 8” to 11
½
“ x 17
½
“.
Pads
8
½
” x 11
½
“
STAPLES
5000 staple cartridge
DIMENSIONS
Width 23”
Height
36”
Length 20” (Conveyor stored).
Length 46” (Conveyor in use).
WEIGHT 205
lbs.
POWER
115v
60Hz
Consumption approx. 180 Watts
Fuse: 10 amp 115v.
