RF Remote Control / RF Receiver
MBNLED
www.mbnled.com
info@mbnled.com
9
HOW TO USE
The remote controller has three buttons and a graphic display to select functions and set
parameters.
Press button three to wake up the controller. The display will switch on, and you are in the
menu you were last time.
If no button is pressed for a specified time, the display will switch off automatically to save
energy of the built in battery.
BUTTON 1: UP
BUTTON 2: DOWN
BUTTON 3: ENTER
MAIN MENU
In the main menu following features can be selected:
DEVICE
PROGRAM
BRIGHTNESS
SPEED
DMX
FADE
LOCK
SETTINGS
DEVICE
One controllable device can be selected by pressing the UP-DOWN buttons. Press
ENTER to activate the selected device.
In the upper line of the display the currently selected device number is displayed.
All other menu items effect the controlled device.
PROGRAM
Starts one of the preprogrammed stand-alone programs.
BRIGHTNESS
Adjusts the master light level of the controlled device. The level gauge on the display only
demonstrates the light level; it does not represent the real level of the lighting device.