Need help or have any questions? Call us at 1-714-963-0329 or send us an email to service@globalhobby.net
5
Before you begin, take a moment to familiarize yourself with the transmitter con-
trol functions for proper operation:
Rudder Stick
- Moving this stick left or right steers the boat left or right.
Rudder Trim Lever
- Allows fine-tuning of the rudder lever, to correct any unwanted
turning of the boat when you let go of the stick.
Throttle Stick
- Moving this stick upward increases the speed of the boat.
Throttle Trim Lever
- Allows adjustment of the throttle function.
Throttle Detent Lever
- Allows you to put the throttle into “low speed” or “starting”
mode. When the detent lever is down, the throttle stays OFF until you push on the
throttle lever, and the boat naturally runs slower. You always start the boat in “low
speed” mode with the throttle detent lever down. When you are away from the shore
and ready for higher speed, move the detent lever UP, which allows easier throttle con-
trol and higher speeds.
TRANSMITTER CONTROL FUNCTIONS
