8 of 68
1.1.
GLOBAL
ASPECTS
OF
SECURITY
Compliance
with
the
rules
and
recommendations
contained
in
this
publication provide safe use and appropriate
operation of the machine.
1) The best performance and long life of the
machine will be obtained from its
appropriate use. Scrupulous observation
of the instructions contained in this manual
becomes, therefore, necessary;
2) Any spare parts request must include the
model type and serial number provided in
the list of spare parts or applied on
components’ plates;
3) Installation of the machine must be carried
out in compliance with the safety
regulations in force;
4) Do not remove or tamper with the
protections and safety devices, check their
effectiveness periodically;
5) Strictly observe the instructions mentioned
by hazard symbols (pictograms) and
maintain readability of the message;
6) Operation and maintenance must be
performed by qualified personnel, trained
and enabled to perform the tasks
foreseen.
Operation
procedures
and
responsibilities of operators must be
clearly defined to ensure safe and proper
use and maintenance;
7) Before any maintenance or adjustment
operation you must select and block all
power sources, making sure to avoid
unexpected starts;
8) If the machine maintenance is not
performed in accordance with instructions
provided, is carried out with non-original
spare parts or without written permission
of
the
company
that
performed
maintenance of the used machine, or
otherwise in such a way as to
compromise its integrity or modify its
characteristics relieves the company from
any responsibility regarding the safety of
persons and the faulty operation of the
machine.
●
The user shall be required to comply
with periodic maintenance warning
indicated in Chapter 6;
●
The user shall be required to comply
with the qualifications of the relevant
personnel:
OPERATOR / MAINTENANCE
TECHNICIAN:
Carries out the
tasks necessary for the basic
functioning of the machine:
execution of the work cycle,
implementation of operator commands,
other operations closely linked to normal
production, any cleaning and inspection
operation performed on a daily basis,
enforcement of ordinary maintenance
operations (see Chapter 6). Works only
with enabled safety functions.
MAINTENANCE TECHNICIAN
SPECIALIST (RESELLER):
Involved in all operating
conditions and at all protection
levels. Makes extraordinary operations
that cannot be run by the user (see
Chapter 6 regarding maintenance).
Summary of Contents for MK8-75
