MCK 3000
Installation and use
MCK 3000
3.1 Mounting the Monitor
To assemble the instrument operate as follows:
•
on a flat surface inside the cabin of the vehicle, drill 2 holes (D. 9 mm)
aligned with those on the bracket (Figure 33 - ref. <
A
>) and, by means of
two screws (not supplied), securely fasten the bracket to the structure;
•
fasten the Monitor to the bracket by screwing the supplied knobs (Figure 33
- ref. <
B
>) in the holes on the sides of the Monitor (Figure 33 - ref. <
B1
>).
N.B.:
we recommend installing the Monitor in front of the operator to make it
easier to use during the working cycle.
Figure 3. How to assemble the Computer.
