background image

 

HM PCIe-DIO96H.doc 

Your new Measurement Computing product comes with a fantastic extra 

— 

Management committed to your satisfaction! 

Refer to 

www.mccdaq.com/execteam.html

 for the names, titles, and contact information of each key executive at Measurement 

Computing. 

Thank you for choosing a Measurement Computing product—and congratulations! You own the finest, and you can now enjoy 
the protection of the most comprehensive warranties and unmatched phone tech support. It’s the embodiment of our mission:

 

 

To provide PC-based data acquisition hardware and software that will save time and save money.  

Simple installations minimize the time between setting up your system and actually making measurements. We offer quick and 
simple access to outstanding live FREE technical support to help integrate MCC products into a DAQ system. 

Limited Lifetime Warranty:

 Most MCC products are covered by a limited lifetime warranty against defects in materials or 

workmanship for the life of the product, to the original purchaser, unless otherwise noted. Any products found to be defective in 
material or workmanship will be repaired, replaced with same or similar device, or refunded at MCC’s discretion. For specific 
information, please refer to the terms and conditions of sale. 

Harsh Environment Warranty® Program

: Any Measurement Computing product that is damaged due to misuse, or any 

reason, may be eligible for replacement with the same or similar device for 50% of the current list price. I/O boards face some 
harsh environments, some harsher than the boards are designed to withstand. Contact MCC to determine your product’s 
eligibility for this program 

30 Day Money-Back Guarantee:

 Any Measurement Computing Corporation product may be returned within 30 days of 

purchase for a full refund of the price paid for the product being returned. If you are not satisfied, or chose the wrong product by 
mistake, you do not have to keep it. 

These warranties are in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability or 
fitness for a particular application. The remedies provided herein are the buyer’s sole and exclusive remedies. Neither 
Measurement Computing Corporation, nor its employees shall be liable for any direct or indirect, special, incidental or 
consequential damage arising from the use of its products, even if Measurement Computing Corporation has been notified in 
advance of the possibility of such damages. 

 

 

Summary of Contents for PCIe-DIO96H






















Reviews: