2
Install the front bezel.
a
Lock the right end of the front bezel to the rack handle
b
Rotate the front bezel clockwise until the left end clicks into place
c
Lock the bezel if needed.
Enable RMM
Enable Intel RMM on your Advanced Threat Defense Appliance.
Task
1
Restart the Advanced Threat Defense Appliance.
2
During the reboot process, press
F2
.
3
On the
BIOS Setup Utility
page, select the
Server Management
tab.
4
Select
BMC LAN Configuration
.
5
Locate
Intel (R) RMM4 LAN configuration
and configure the settings.
a
Highlight
IP Source
, press
Enter
, then select
Static
.
b
Highlight
IP Address
, then enter the IP address.
c
Highlight
Subnet Mask
, then enter the subnet mask address.
d
Highlight
Gateway IP
, then enter the gateway IP address.
6
Locate
User configuration
and configure the settings.
a
Highlight
User status
, press
Enter
, then select
Enabled
.
b
Highlight
User password
, press
Enter
, then enter the root account password.
c
Press
Enter
, confirm the password, then press
Enter
again.
7
Press
F10
, then press
Enter
.
8
Log on to the RMM interface.
15
