1
GENERAL INFORMATION
Read this manual before fitting or operating the machine or accessory. Whenever any
doubt exists contact your local dealer or the McConnel Service Department for assistance.
Only use ‘Genuine McConnel Parts’ on McConnel machinery and equipment
.
DEFINITIONS
:
The following definitions apply throughout this manual;
DANGER:
Alerts to a hazardous situation which will result in death or serious injury if not
observed carefully.
WARNING:
Alerts to a hazardous situation which could result in death or serious injury if
not observed carefully.
CAUTION:
Alerts to a hazardous situation which could result in damage to the machine
and/or equipment if not observed carefully.
NOTICE:
Specific or general information considered important or useful to emphasise.
LEFT HAND (LH) & RIGHT HAND (RH):
These terms are applicable to the machine when
fitted to the tractor and viewed from the rear; these terms also apply to tractor references.
SERIAL PLATE
All machines are equipped with a serial number plate containing important information
relating to the machine including a unique serial number used for identification purposes.
Note: Images in this manual are provided for instruction and informational purposes only and may
not show components in their entirety. In certain instances images may appear different to the
actual machine; where this occurs the general procedure will be basically the same. E&OE.
NOISE LEVEL
LpA = the value indicates the maximum sound level perceived by the operator at a
distance of 1m from the machine.
LwA = the value indicates the sound level outside the machine and refers to the noise
perceived by those who are in the vicinity of the work area.
