background image

3

IDENTIFICATION OF SYMBOLS

A.

B.

C.

D.

E.

F.

G.

H.

I.

J.

K.

A.

WARNING!

This brushcutter can be dangerous! Careless or improper use can

cause serious or even fatal injury.

B. Read and understand the instruction manual before using the brushcutter.

C. Always use:

Ear protection, eye protection, head protection, boots, and gloves.

D.

DANGER!

Blade can thrust violently away from material it does not cut. Blade thrust

can cause amputation of arms or legs. Keep people and animals 15 meters away.

E

.

WARNING!

Blade/trimmer line can throw objects violently. You and others can be

blinded or injured. Always wear eye protection and leg protection.

F. The operator of the machine must insure that no one comes within a 15 meter radius

while working. When several operators are working within the same area a safety dis-

tance of at least 15 meters must be observed.

G. Use unleaded or quality leaded petrol and two--stroke oil mixed at a ratio of 2.5%.

H. Handlebar to be positioned only below the arrow.

I.

Engine ON/STOP (I/0) Switch.

J. Guaranteed sound power level according to Directive 2000/14/EC

K.

Maximum rotational frequency of the spindle, rpm

SAFETY RULES

WARNING:

When using gardening

appliances, basic safety precautions should al-

ways be followed to reduce the risk of fire and

serious injury. Read and follow all instructions.

DANGER:

This power tool can be dan-

gerous!

This unit can cause serious injury in-

cluding amputation or blindness to the operator

and others. The warnings and safety instruc-

tions in this manual must be followed to provide

reasonable safety and efficiency in using the

unit. The operator is responsible for following the

warnings and instructions in this manual and on

the unit. Read the entire instruction manual be-

fore assembling and using the unit! Restrict the

use of this unit to persons who read, under-

stand, and follow the warnings and instructions

in this manual and on the unit. Never allow chil-

dren to operate this unit.

SAFETY INFORMATION

ON THE UNIT

INSTRUCTION

MANUAL

DANGER:

Blade can thrust violently

away from material it does not cut. Blade

thrust can cause amputation of arms or legs.

Keep people and animals 15 meters away.

WARNING:

Blade/trimmer line can

throw objects violently. You and others can be

blinded or injured. Wear safety glasses and

leg protection.

Summary of Contents for Cabrio 115154526



















Reviews: