Technical data sheet for “EXPRECIUM” PCI Twin Line Receiver
V000911
MCDI Inc.
Internet: http://www.mcdi.com
86 Claude-Champagne Avenue, Montreal, QC, Canada H2V 2X1
PH: +514-481-1067
FX: +514-481-1487
Description
“EXPRECIUM” is a full format PC-based twin-line alarm
receiver card.
EXPRECIUM connects to PCI bus of a PC Computer. Its
small size fits table top IBM PCs or compatible PC Pentium
and up. EXPRECIUM interfaces to two telephone lines,
imposing no limit to the number of customers per line. It
provides a parallel printer port for direct output without going
through PC.
With large size memory, fast modem circuit, improved PC
bus interface and Caller ID option, EXPRECIUM adds a new
dimension to Alarm Receiving and PC integrated Monitoring
Station.
All MCDI’s PCB receivers work even if PC is down. If
external battery power is provided, naturally.
Option: Remote display / control unit. Packaged as stand
alone device or fitted in PC’s CD anchor slot.
Certification
FCC(USA), IC(Canada), CE-Security (Europe),
CE-0560 Telecom (Europe)
Features
•
Made for PCI bus connection
•
Easy to install:Plug & play and Hot swap.
•
Supports SIA, CFSK, BFSK, VFSK, Etc.
•
Caller Identification (Option)
•
Internal buffer 1800 Events
•
Non Volatile Memory
•
Dead line detection
•
Up to 12 receivers or more per PC
•
Alert/Warning buzzer
•
Supervision of chargeable back-up battery
•
Selectable Monitoring software interfaces
•
Listen-in, Two way voice
•
Remote control and display (option)
Specifications
Communications:
EXPRECIUM provides 2 RJ11 type jacks for telephone
line connection.
Type
:
Pulse, DTMF, FSK
Reception Speed
:
10, 20, 40 pps DR / CS
Handshake and Kiss-off
:
1400Hz / 2300Hz/2225Hz
Pulse Frequency
:
1800Hz / 1900Hz
Telim//Robofon
:
1180Hz / /1100Hz
Reception Formats supported:
Acron
Radionics 6500
Ademco:
Radionics extended
- Slow/Fast;
Sescoa Slow, Super Fast
- Contact ID;
Sescoa Standard
- Extended;
SIA
- Express;
Contact ID
- High Speed
- compressed & Extended
CFSK,BFSK,
VFSK
Silent Knight Slow
MCDI-Take-a-look
SurGard
FBI Super Fast
Napco Point ID
3x1
3x1 extended
4x1
3x1 extended compressed 4x2
4x1 extended
4x1 extended compressed 4x2
4x2
Zero removed 3x1, 4x1, extended.
Optex’s Varitech
C&K: Bell 103A2 or CCIT ( option)
For Germany and Scandinavia (option):
Telim
Robofon
Printer Output:
Standard DB25 connector for Centronics Parallel
Interface.
Card linking arrangement allowing one printer to serve
all MCDI PCB receivers in one PC.
Event Logging when PC is absent:
EXPRECIUM can store over 1800 events in standby
operation when PC is down.
Power Requirements:
From co12V Supply:
200 mA max.
From 6V Battery (standby):
500 mA
Size and weight:
8” / 20.3 cm (L) x 5” / 12.7 cm(H); 0.484 lb / 220 gr
Station Requirements:
IBM™ or Compatible Pentium™ computer and up. Table
top size enclosure. PCI bus. DOS or Windows
Printer with Centronics parallel interface and cable with
DB25 connector.
PC addressing:
PCI bus. Plug & Play. PC must have Plug & Play BIOS.
Battery Back-up:
EXPRECIUM provides charging and supervision circuitry
for an external 6-Volt battery (not supplied). 12v battery
may be used but no charging will occur.
Charging Voltage
6.7 volts
Charging Current Limit
500 mA
Monitoring Software:
EXPRECIUM interfaces with Monitoring software in
Native mode, Ademco™ 685 emulation mode and
SurGard™ MLR2 emulation mode.
Optional remote control MRD1000:
•
Displays incoming signals or controls on 2 lines by 20
characters.
•
Configures and operates EXPRECIUM, TLR+ or SA-
TLR+ .
•
Alarm acknowledge key for easy operation.
•
Power fed by EXPRECIUM, TLR+ or SA-TLR+ .
•
External self contained unit or Mounted in PC’s CD slot.
Summary of Contents for exprecium
Page 1: ......
