AutoDRIVE Keypad Replacement
IMPORTANT NOTICE - READ CAREFULLY
800.292.2737 | sales@aymcdonald.com | aymcdonald.com
Page 3 / 2-22
3210-689
Remove the old keypad from the keypad
panel and remove any adhesive left
from the old keypad.
Peel the clear plastic adhesive scratch protector off the back of the keypad and then peel back the adhesive backing from
the new keypad, feed the ribbon cable through the hole in the keypad panel and stick the new keypad to the keypad panel.
Step 6
Step 7
Insert the replacement keypad ribbon cable into the connector
on the control board and press down on the connector to lock
in the ribbon cable.
Step 8
