McElroy DATALOGGER 6, Operator'S Manual

Saf

et

y

2 - 1

Safety

DataLogger

®

 6

SAFETY

There can be several specific safety messages on this 

machine. The exact location of the hazards and the 

description of the hazards are reviewed in this section. 

Please become familiarized with all safety messages.
Make are that all of the safety messages on the 

machine are legible. Clean the safety messages or 

replace the safety messages if you cannot read the 

words. Replace if the illustrations are not legible. When 

you clean the safety messages, use a cloth, water and 

soap. Do not use solvent, gasoline, or other harsh 

chemicals to clean the safety messages. Solvents, 

gasoline, or harsh chemicals could loosen the adhesive 

that secures the safety message or damage the print of 

the safety message.
Replace any safety message that is damaged, or 

missing. If a safety message is attached to a part that is 

replaced, install a safety message on the replacement 

part. New safety messages can be ordered from 

McElroy using the part number listed.

General Safety

Safety is important. Report anything unusual that you 

notice during set up or operation.

LISTEN

 for thumps, bumps, rattles, squeals, air leaks, or 

unusual sounds.

SMELL

 odors like burning insulation, hot metal, burning 

rubber, hot oil, or natural gas.

FEEL

 any changes in the way the equipment operates.

SEE

 problems with wiring and cables, hydraulic 

connections, or other equipment.

REPORT

 anything you see, feel, smell, or hear that is 

different from what you expect, or that you think may 

be unsafe.

Safety Equipment

Wear a hard hat, safety shoes, safety glasses, and 

other applicable personal protective equipment.
Remove jewelry and rings, and do not wear loose 

fitting clothing or long hair that could catch on controls 

or moving machinery. Remove any loose safety 

equipment during an operation that could be drawn 

into or caught in the machine.

Ensure proper fire prevention or other fire-fighting 

equipment is available and all personnel know how 

and when to use it.

Equipment Not Explosion 

Proof

This safety message is located on the cord of the 

heater. 

DataLogger® equipment is not explosion proof. 

Operation of equipment in an explosive atmosphere 

may result in serious injury or death.

Do not operate this equipment in an explosive 

atmosphere.

Units with Hydraulics

Escaping fluid under pressure can penetrate the skin 

causing serious injury. Keep hands and body away 

from pinholes which eject fluid under pressure. Use a 

piece of cardboard or paper to search for leaks. If any 

fluid is injected into the skin, it must be immediately 

removed by a doctor familiar with this type of injury.

For hydraulically operated equipment, it is important to 

remember that a sudden hydraulic oil leak can cause 

serious injury, or even be fatal if the pressure is high 

enough.

NOTICE:

 Wear safety glasses, and keep face clear of 

area when bleeding air from hydraulic system to avoid 

spraying oil into eyes.

ДУМАЙТЕ 

О 

БЕЗОПАСНОСТИ 

В ПЕРВУЮ 

ОЧЕРЕДЬ

PENSEZ 

Sécurité 

en

1er 

SAFE1S

T-12

-2

2-9

2

¡PELIGRO!

¡ATENCIÓN! 

WR000

78-

4-8-9

3

WR000

34

-11-

30

-9

2