Carriage Assembly
The DynaMc HP fusion machines are available in a 4-Jaw and
2-Jaw model and are hydraulic hand pump operated.
The 4-Jaw HP carriage assembly consists of two fixed jaws and
two hydraulically operated movable jaws bolted to a skid.
For fittings, the inner fixed jaw can be connected to the movable
jaws on the carriage for a 3 movable 1 fixed jaw configuration.
The 2-Jaw HP carriage assembly consists of one fixed jaw and one
hydraulically operated movable jaw bolted to a skid.
All HP carriage assemblies have a hydraulic hand pump to
pressure the hydraulic cylinders to move the jaws.
TX02949-4-15-09
Overview
Introduction to the DynaMc 28, 250 and
412 Hand Pump Fusion Machine
The McElroy DynaMc HP fusion machines are manual hydraulic
operated fusion machines designed to butt fuse polyethylene pipe.
If fusing other thermoplastic pipe materials, refer to the pipe
manufacturer's suggested procedures or appropriate joining
standard.
The DynaMc 28HP model fuses 2" IPS through 8" DIPS (63 mm -
200 mm).
The DynaMc 250HP model fuses 2" IPS (63 mm) minimum to 250
mm maximum pipe.
The DynaMc 412HP model fuses 4" IPS through 12" DIPS (110
mm - 340 mm)
TX02948-4-15-09
PH
05
03
2-01-0
3-14
PH
05
03
2-01-0
3-14
PH
05
03
3-01-0
3-14
2 - 2
Summary of Contents for DynaMc 250HP
Page 44: ......
