Preventative Maintenance
To insure optimum performance, the machine must be kept clean
and well maintained.
With reasonable care, this machine will give years of service.
Therefore, it is important that a regular schedule of preventive
maintenance be kept.
Store machine inside, out of the weather, whenever possible.
TX00428-8-10-95
Maintenance
Washing the Machine
The machine should be cleaned, as needed with a soap and
water wash.
TX00429-9-15-94
Check Hydraulic Fluid
The hydraulic fluid level should be checked daily.
The reservoir should be approximately half full of fluid. Do not
overfill.
If the pump and cylinders are empty, fill pump with fluid and move
the carriage left and right fully 3 times and check the fluid level
and fill. Bleeding the hydraulic system is required when system has
been empty. Refer to "Bleeding the Hydraulic System" section for
instructions on bleeding the hydraulics.
Change the hydraulic fluid every two years. Drain the reservoir
completely and refill the reservoir with clean new fluid.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic
fluid recommendations.
TX02973-08-21-17
CD0014
2-11-
2-
94
PH
03
87
7-
4-15-0
9
PH
03
861-
4-15-0
9
6 - 1
Summary of Contents for DynaMc 250HP
Page 44: ......
