Overview
2 - 4
Depth Star
The depth star is used to change the stab depth of movable jaws by providing
a stop for the movable jaws to rest against. It rotates to change the pipe size to
fuse and each size is labeled on the face of the depth star.
There is a depth star to match the appropriate heater adapters. The depth stars
have a marking that will match the marking of the heater adapters.
The depth stars that are not being used are stored at the end of the machine
next to the heater controls when not in use.
TX04853-12-14-15
CD0
1408-1
1-1
2-1
5
CD0
1456-1
2-1
0-1
5
Carriage Jaws and Inserts
Each jaw frame has two insert holders and the jaws are opened
and closed using the handle at the end of the jaw frame.
Inserts are installed into the insert holders on each jaw frame.
Inserts are locked into place by a spring detent in the insert
holder. The inserts with the stop tabs are for the fitting and are
installed on the inner jaw frame on the same side as the socket
heater adapter on the heater.
TX04852-12-14-15
CD0
14
12-1
2-1
0-1
5
CD0
145
7-1
2-09-1
5
Insert Holder
Jaw Open/
Close Handle
Stop Tabs
Insert
Summary of Contents for SmartFab 125
Page 1: ...Manual 460801 Revision Rev C 06 19 Operator s Manual Original Language English SmartFab 125...
Page 30: ......
Page 32: ......
