DataLogger Operation
Entering DataLogger operation, the operator will fill out the joint and pipe information. After entering all the information the
operator will be able to perform facing operations and then start the data logging of the heating and fusion operations.
Joint Information
Å
Change Date and Time:
Change the date and time if the information is incorrect.
Å
Location:
Enter the location where the fusion joint is being performed.
Å
Project:
Enter the name for the project the fusion joint is attached to.
Å
Operator ID Number:
Enter the identification number for the operator.
Å
Job Number:
Enter the job number for the project.
Å
Joint Number:
The number of the current fusion joint. The number will automatically increment as fusion
joints with the same information are performed.
Å
Notes:
Enter information relative to the fusion joint.
A dialog box will appear if the heater is off and
will ask the operator to turn on the heater.
Press
Next
to go to the next screen.
Operation
4 - 4
PH053
92-0
4-1
5-1
6
PH053
93-0
4-1
5-1
6
