Page 8
For technical questions, please call 1-888-866-5797.
Item 64857
Sa
F
ety
Opera
ti
O
n
Maintenance
in
S
talla
ti
O
n
checking the Oil
1� Check the oil level before operation�
Fill the Pump Crankcase with included
SAE 30W, non-detergent, Air Compressor Oil�
iMpOrtant:
running the air compressor
with no oil or low oil will cause damage to
the equipment and void the warranty.
2� The oil level should be at the center of the “full” level
on the Oil Sight Glass�
Add oil as needed to maintain this level�
Do not let the oil level go below
the center dot and do not overfill the oil
so that it is above the center dot�
Oil
Breather
Oil
Sight
Glass
OVerFill
lOW
FUll
3� To add oil:
a� Remove the Oil Breather�
b� Using a funnel to avoid spills, pour enough
oil into the Pump Crankcase to reach
the “full” level in the Oil Sight Glass�
c� Replace the Oil Breather�
note:
SAE 30W, non-detergent,
Air Compressor Oil (sold separately) is
recommended for use with this compressor�
4� If uncertain which oil to use for this compressor,
call Harbor Freight Tools customer service
at 1-888-866-5797 for assistance�
5�
change the compressor oil after the first
hour of use to remove any debris.
caUtiOn! tO preVent inJUry FrOM BUrnS:
Do not add or change the oil while
the compressor is in operation.
allow the compressor to cool before replacing oil.
