Power on and operation
Description for one channel (A) or (B):
Open the battery compartment and insert 2pcs Mignon (AA) batteries.
Please check if the
polarity is okay !
Connect XLR audio output with amplifier or mixing desk. You can use
standard XLR/XLR cables if you have amplifier/mixing desk with XLR inputs. Set receiver
volume control to
„0“. Connect the 13.5V/DC net adaptor with receiver and plug in a AC net
socket. Press power on switch. The receiver power LED will indicate operation. Switch
wireless microphone to middle position
„Mute“. The receiver RF-signal LED will be „On“
when microphone and receiver are connected and send data. When the microphone is
switched to „Mute“ no audio signal will be transferred. Switch microphone to „On“ and
increase receiver volume level. The receiver peak LED will indicate when audio signal is
reaching max. level. Increase amplifier volume to desired level. If there is distortion sound,
decrease the receiver volume level.
Trouble shooting:
If you switch microphone to „Mute“ or „On“, the microphone indicator
LED has to be on. Otherwise replace the batteries by new ones. If you switch microphone to
„mute“ or „on“, the receiver RF-signal LED has to be „on“. Otherwise check if you have
extended the antenna completely or reduce distance between wireless microphone and
receiver. If the RF-Signal LED is
„on“, the Peak-LED indicates signal but no audio signal
can be heard on speakers: check the audio cable between receiver and mixing
desk/amplifier. Check as well all mixing desk/amplifier settings.
Wireless microphone
The system is using UHF frequencies in two bands ML (823 MHz - 832MHz) and ISM (863 MHz - 865MHz). Maximum
transmission distance approx. 50m. The used frequencies in ML band 863 MHz - 865MHz are license free in Federal
Republic of Germany. In some countries UHF needs to be licensed by local authorities. We declare that the user is
responsible to fulfill these license requirements in the country of use.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Herewith Musikhaus Kirstein GmbH declares that the device/radio unit [McGrey UHF-2V] is in compliance with the EU
directive 2014/53/EU. You can download the EC declaration of conformity for this item under download link:
http://www.kirstein.de/docs/Konformitaetserklaerung/CE_Konformitaetserklaerung_00039499.pdf
WEEE-Declaration
Your product is designed and manufactured with materials and components of high quality, which are recyclable and can
be reused. The symbol means that your product should be disposed of separately from household waste when it reaches
its end of life. Please dispose of this equipment at your local collection point or recycling center. Please help to protect the
environment in which we all live.
All specifications and appearances are subject to change without notice. All information was correct at time of printing.
Musikhaus Kirstein GmbH does not guarantee for the accuracy or completeness of any description, photograph or
statement contained in this manual. Printed colors and specifications may vary slightly from product. Products from
Musikhaus Kirstein GmbH are only sold through authorized dealer. Distributors and dealers are not agents of Musikhaus
Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH legally in any way. This manual is protected by
copyright. Any copying or reprint, even in excerpts, is only allowed with written consent of Musikhaus Kirstein GmbH. The
same applies to reproduction or copying of images, even in altered form.
E3
E
N
G
L
I
S
H
