McHale
995 L+T
Square Bale Wrapper
79
Pre-Delivery Inspection Form
A signed copy of this form is to be retained by both the Dealer and the Customer.
PRE-DELIVERY INSPECTION (PDI)
995 L+T Square Bale Wrapper
Castlebar Road, Ballinrobe, Co. Mayo
Tel: +353 (94) 95 20300 Fax: +353 (94) 95 20356
E-mail: sales@mchale.net Web: www.mchale.net
DEALER
:....................................................
Model: 995 L+T
Square Bale Wrapper
Full Address:...............................................
Serial No:..........................................................
....................................................................
Date Delivered:.................................................
Fitter:...........................................................
Date Inspected:.................................................
CUSTOMER
:...............................................
Full Address:...............................................
Tel:....................................................................
....................................................................
Mobile:..............................................................
....................................................................
E-mail:...............................................................
ENSURE THAT THE TRACTOR IS OF THE CORRECT SPECIFICATION FOR THIS MACHINE
REFER TO THE OPERATOR INSTRUCTOR MANUAL BEFORE MAKING ANY ADJUSTMENTS!
1.
Check that all accessories are with the
Owner/Operator. Check Operator
Instruction Manual and Parts List.
10.
Where the remote control option is supplied
with the machine, ensure that it is fitted
correctly.
2.
Ensure machine is re-assembled correctly.
(Refer to all assembly instructions
supplied).
11.
Check all manual functions on the control unit.
Run machine through an automatic cycle.
3.
Ensure that the wheels are correctly fitted
(i.e. valve to the outside). Torque wheel
nuts correctly (995 T).
12.
Check for smooth operation of the lift-arm,
table, rollers and all moving parts.
4.
Check for correct tyre-type, tread and
pressure (995 T).
13.
Check that all electrics and lights function
correctly.
5.
Ensure drawbar is fitted correctly before
coupling machine to tractor. Torque all
bolts (995 T).
14.
Check dispenser(s) are running smoothly &
free from damage or grit.
6.
When hitched to tractor check that the
machine is level with the ground. Adjust
drawbar if necessary. Attach 7 pin plug for
lighting system (995 T).
15.
The operator must be fully aware of all
hazards, controls (electric & hydraulic), all
functions & safety devices of both the machine
and the tractor.
7.
Connect hydraulic hosing to tractor and
ensure proper hydraulic setup. Note:
Ensure free flow return to tank.
16.
Ensure that the owner/operator reads the
Operator Instruction Manual and understands
fully all safety and operating aspects of the
machine as described therein.
8.
On electronic machines, ensure control-
unit power supply is 12v direct from
battery otherwise the machine may
malfunction.
17.
Instruct operator on machine maintenance, i.e.
Check chain tensions, adjustments, tyre
pressure and wheel nuts, also areas to be
greased daily along with other routine
functions.
9.
On electronic machines, ensure that the
control-unit is on the correct program to
suit the machine specification and that it is
starting & finishing in the correct position.
I am satisfied that the above checks have been carried out, and that the machine is complete with all accessories and manuals.
Signed:...............................................................................
(Dealer)
Date:..............................
Signed:...............................................................................
(Owner)
Date:..............................
This machine must be registered on www.mchale.net by the Dealer in order to quality for Warranty!
