McHale
995 L+T
Square Bale Wrapper
80
McHale Limited warranty
McHale
Engineering, Ballinrobe, Co. Mayo, Ireland (hereinafter called “the company”) warrants
to the original retail purchaser that new products sold and registered with the company, shall
be, at the time of delivery, free from defects in material and workmanship, and that such
equipment is covered under Limited Warranty providing the machine is used and serviced in
accordance with the recommendations in the Operator’s manual.
This Limited Warranty covers the equipment for 10,000 bales, or a period of one year starting
from the date the equipment is commissioned, whichever comes first.
The online submission of the pre-delivery inspection (PDI) form by the dealer (Importer) is
taken as evidence of the delivery of the machine to the original retail purchaser. This is
compulsory, and is required to record the machine in the
McHale
warranty system.
These conditions are subject to the following exceptions:
Parts of the machine which are not of
McHale
manufacture, such as tyres, PTO
shafts, slip clutches, hydraulic cylinders, etc. are not covered by this limited warranty,
but are subject to the warranty of the original manufacturer. Warranty claims applying
to these types of parts must be submitted in the same way as if they were parts
manufactured by
McHale
. However, compensation will be paid in accordance with
the warranty agreement of the manufacturer concerned.
This limited warranty does not apply to failure through normal wear and tear, to
damage resulting from negligence or from lack of inspection, from misuse, from lack
of maintenance and/or if the machine has been involved in an accident, lent out or
used for purposes other than those for which it was intended by the company.
This Limited Warranty will not apply to any product that has been altered or modified
in any way without the express permission of the company, or if parts not approved
by
McHale
are used in repair.
The company take no responsibility for any additional costs, including loss of oil and/
or consumables incurred during the failure and repair of a product
The company cannot be held responsible for any claims or injuries to the owner or to
the third party, nor to any resulting responsibility.
Also, on no account can the company be held liable for incidental or consequential
damages (including loss of anticipated profits) or for any impairment due to failure, a
latent defect or a breakdown of a machine.
The customer will be responsible for the following costs:
Normal maintenance such as greasing, maintenance of oil levels, minor adjustments,
etc. as specified in the Operator’s manual.
Labour charges other than originally agreed, incurred in the removal and
replacement of components.
Dealer’s travel time and travel costs to and from the machine.
Parts defined as normal wear items such as, but not limited to PTO shafts, chains,
tyres, bearings, belts, blades, knives, tines, tine bars, slip clutches, nylon chain
runners and slides, etc. that are not covered under the Limited Warranty.
