Choices are
Legacy ISA
and
PCI/ISA PnP
.
PCI/VGA Palette Snoop:
Leave this field at
Disabled
.
Choices are Enabled, Disabled.
3-7 PC HEALTH STATUS
This category shows your system’s current status such as CPU temperature, System
temperature, and the current speed of Fan(s).
CMOS Setup Utility – Copyright © 1984-1999 Award Software
PC Health Status
Current CPU Temp. 50ºC
Current System Temp. 25ºC
Current CPUFAN1 Speed 4200
Current CPUFAN2 Speed
4200
Vcore 1.71
UCC SRAM 3.32
3.3V
3.3
5 V
5.1
12V
12.1
Item Help
Menu Level
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 3-7
3-8 FREQUENCY/VOLTAGE CONTROL
CMOS Setup Utility – Copyright © 1984-1999 Award Software
Frequency/Voltage Control
Auto Detect DIMM/PCI Clk Enabled
Spreed Spectrum
Disabled
CPU Host/PCI Clock Default
Item Help
Menu Level
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 3-8
DIMM/PCI CLK:
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The choice: Enabled, Disabled.
Spread Spectrum:
This item allows you choice CPU’s clock/Spread Spectrum (ON,OFF)
enable/disable to the spread spectrum modulate.
CPU Host/PCI Clock: In this item you can choose the CPU HOST/PCI Clock. The setting
are: Default ,100/33Mhz,105/35Mhz, 112/37Mhz.
*Please turn off system power if the screen does not have any display after change of the setting. Then
press and hold down “ INS ” key, and turn on system power again (release “ INS ” key till the screen
has display) to reset correct frequency of CPU HOST clock.
3-9 LOAD OPTIMAL DEFAULTS
Load Optimal Defaults:
23
