background image

2

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

WARNING - TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

The lightning flash with arrowhead,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or

back. No user serviceable parts inside.

The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature ac-
companying the appliance.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, 

heat ducts

, or other apparatus (including

amplifiers) that produce heat.

9. 

Warning: This unit is capable of producing high

sound pressure levels. Continued exposure to high
sound pressure levels can cause permanent hearing
impairment or loss. User caution is advised and ear
protection is recommended when playing at high
volumes.

10. 

Route DC power cords so that they are not likely to be

pinched by items placed upon or against them, paying
particular attention to the point where they enter the

apparatus

.

11. Only use attachments/accessories specified by the

manufacturer.

12. 

Do not mount this product with an unstable bracket as

the 

apparatus

 may fall, causing serious injury to a

person, and serious damage to the product.

13. Unplug this apparatus when unused for long

periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cable is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

15. Do not expose this equipment to dripping or

splashing and ensure that no objects filled with
liquids, such as vases, are placed on the
apparatus.

Summary of Contents for MCC406M

























Reviews: