22
Centering the MS750 Screen
Allows you to center the MS750 user interface horizontally
on your TV screen. Follow these steps to center the MS750
screen:
1. Press the SETUP
push-button on
the remote to
display the Setup
menu.
2. Select the Video
menu. Refer to
figure 6.
3. Select the Screen
Centering menu.
Refer to figure 7.
4. Using the Left
and Right push-
buttons on the
remote, adjust
the screen so that
it appears hori-
zontally centered
on your TV.
5. Press the SE-
LECT push-
button on the
remote to high-
light the SAVE
button.
6. Press SELECT
again to save the
current position.
Adjusting your TV’s Brightness
Follow these steps to adjust the brightness on your TV:
1. Press the SETUP push-button on the remote to display
the Setup menu.
2. Select the Video menu. Refer to figure 6.
3. Select the Brightness menu. Refer to figure 7.
4. Turn your TV’s
brightness
control all the
way up then
lower it to the
point where the
vertical black bar
on the left just
disappears. This
will get your brightness control as close to the proper
setting as possible without the use of special software
and hardware.
5. Press SELECT to return to the previous menu.
Adjusting your TV’s Contrast
The Contrast or Picture Adjustment control allows you to
optimize the contrast (which is sometimes called Picture)
of their TV, using the TV’s Contrast or Picture controls.
This setting helps reduce video “blooming” and create a
clearer, more readable user interface. Follow these steps to
adjust the contrast on your TV:
1. Press the SETUP push-button on the remote to display
the Setup menu.
2. Select the Video menu. Refer to figure 6.
3. Select the Contrast menu. Refer to figure 7.
4. Turn your TV’s
Contrast or Pic-
ture control all
the way up, then
lower it to the
point where the
vertical line ap-
pears straight and
does not bend. It
may not be possible to make it completely straight on
some TV sets. This will get your Contrast control as
close to the proper setting as possible without the use
of special software and hardware.
5. Press SELECT to return to the previous menu
Adjusting your TV’s Sharpness
The Sharpness adjustment allows you to set the Sharpness
or Detail control of your TV so that onscreen text is as
readable as possible. Proper adjustment of the Sharpness
control (sometimes called the Detail control) on your TV,
allows you to see video and on screen menus more accu-
rately. Follow these steps to adjust the sharpness on your
TV:
1. Press the SETUP push-button on the remote to display
the Setup menu.
2. Select the Video menu. Refer to figure 6.
3. Select the Sharp-
ness menu. Refer
to figure 7.
4. Turn your TV’s
Sharpness or
Detail control up
and down until
the text on the
screen is as read-
Figure 6
Figure 7
Summary of Contents for MS750
