- 5 -
- 6 -
SYSTEM VARIATIONS
2 CHANNELS 2 WAY SYSTEM FRONT/REAR NON FADE
2
CH
4
CH
2CH/4CH
Front/HP
Rear/Mid
HP/BP
2
CH
4
CH
Front tweeters
Rear woofers
Sub-woofers
Front Output
Rear Output
Sub Output
2 CHANNELS 3 WAY
2
CH
4
CH
2CH/4CH
Front/HP
Rear/Mid
HP/BP
2
CH
4
CH
Front tweeters
Rear woofers
Sub-woofers
Front Output
Rear Output
Sub Output
SPECIFICATIONS & FEATURES
Crossover Frequencies
x1 variable between 60Hz and 600Hz
x10 variable between 600Hz and 6KHz
x1 variable between 60Hz and 600Hz
x10 variable between 600Hz and 6KHz
variable between 50Hz and 500Hz
variable between 40Hz and 150Hz
-Front output
-Rear/Mid output
-Sub output
Highpass:
Lowpass:
Highpass:
Lowpass:
Crossover slope:
Output level:
Subwoofer boost:
Input level/:
Input impedance:
Frequency response:
T.H.D.:
Channels separation:
Signal to noise ratio:
Dimensions:
12 dB per octave
6 dB gain, up to 8 VRMS
variable, 0-6dB @ 45Hz
620mV to 7V
10K ohms
10Hz to 30KHz + 1dB
0.005%
> 75 dB
> 100 dB
130(w) x 187 (L) x 41 (H) mm
1. NOT WORKING
Check all fuses.
Check all power (positive,remote) wire connections.
Check that ground wire is properly connected.
2. LED POWER ON INDICATOR NOT GOING ON:
Same as sign 1 remedy.
3. SOUND DISTORTION AT LOW VOLUME LEVEL
Output level not set correctly.
4. LEVEL OF SOUND IS LOW:
Check the RCA patch cords for loose or misconnected cables.
TROUBLE SHOOTIN G GUID E
5. A WHINING SOUND CAN BE HEARD THROUGH THE SPEAKERS AT LOW
VOLUME LEVEL WITH RUNNING ENGINE:
Check the power wire (red) with good connection directly to the battery
and ground point must make good contact with chassis ground.
