KP03 Mini Apartment Compactor
29
Copyright
©
7/2021 K-PAC
™
Compactors, a product of McLaughlin Family Companies
All Rights Reserved
INSTALLATION
INSTALLATION REQUIREMENTS
GENERAL
The installer of the compactor shall do so in accordance with the appropriate sections of American national
Standard ANSI Z245.2, applicable codes, local ordinances and the manufacturer’s recommendations. The
installer shall affix to such equipment the date of installation, installer’s name and a statement attesting to
compliance with ANSI Standards.
MAIN POWER DISCONNECT
Installation shall include a power disconnecting means that can be locked in the OFF position.
Power disconnects and live electrical components shall have adequate work space in accordance with ANSI/
NFPA 70, National Electrical Code, Section 110, requirements for electrical installations.
Power disconnects with more than 200 volt operating systems shall be labeled with “ARC FLASH” warning
decals on the main disconnect panel face.
INSTALLATION INSTRUCTIONS
IT SHALL BE THE RESPONSIBILITY OF THE INSTALLER OF THE SELF CONTAINED COMPACTORS TO
INSTALL COMPACTORS IN ACCORDANCE WITH CURRENT ANSI Z245.2 - 2013 SAFETY STANDARD AND
OTHER APPLICABLE CODES.
K-PAC
™
DOES NOT ASSUME RESPONSIBILITY FOR INSTALLATION
PROCEDURES OF THIS EQUIPMENT.
CONFORMANCE TO APPLICABLE LOCAL, STATE AND FEDERAL
LAWS CONCERNING INSTALLATION RESTS WITH THE CUSTOMER.
INSTALLATION SITE
Figure 6
All involved personnel shall study this manual completely
before proceeding. Study the installation carefully to be
certain that all safety guards, and safety devices are provided
and in the proper place to protect personnel and equipment
during and after the installation.
2
1
