KP03 Mini Apartment Compactor
START-UP AND TESTING
38
Copyright
©
7/2021 K-PAC
™
Compactors, a product of McLaughlin Family Companies
All Rights Reserved
Figure 15
6. Locate the fan cover
for inspection of the motor fan to identify motor rotation.
7. Identify label
on fan cover to determine the correct motor rotation.
8. Turn the key-locked OFF/ON Switch
to the ON position to enable the compactor controls.
9. Turn the MANUAL /AUTO Switch
to select the MANUAL mode.
10. Quickly turn the FWD/OFF/REV Switch
to the FWD position and back to OFF and stop the
motor.
11. Observe if the rotation of the motor fan through the fan cover to determine if the rotation is correct. If the
pump runs backwards, STOP IMMEDIATELY!
12. If rotation is correct, jog the electric motor to prime the pump. If the pump makes excessive noise, shut the
system down and check the suction line for leaks or an obstruction.
The pump will be damaged if it is run in reverse even for short
periods of time. The direction of rotation must be in
agreement with the marking on the motor.
On 3-Phase motors, reversing any two incoming power lines will reverse
the pump motor rotation.
1
5
3
4
2
