- 7 -
6.
Hold the handle(1), lift the metal start level(figure in
the right), the machine starts to move, release the start
level, the machine stops.
7.
Turn the speed adjust knob to"
" side, you speed up
the machine, while to "
" side, the speed will slow
down
Turn off the brush motor when the brush deck is in
the up position.
How to Lower/Raise the Brush/Pad
1.
To raise the brush pad, step down on the Brush Lift
Pedal until it locks in position .
2.
To lower the brush pad, slightly step on the Brush Lift
Pedal to unlock it, and raise it up slowly into
position
.
How to Set the Solution Flow
Adjust the water flow based on the floor conditions. Lift
the water volume level up to increase the volume, lay down the level to decrease the
volume.
What to Do When You’re Operating The Machine
Brush Forward Assisted System
This machine has the brush forward assisted adjustment device,
when you feel hard to push forward the machine, you can adjust
the device by yourself. Check the right figure:
Vacuuming Up Solution
1.
Make sure the squeegee is in the down position.
2.
As the machine moves forward and solution is
dispensed, the squeegee will vacuum it up into
the recovery tank.
3.
If necessary adjust squeegee pressure by the
two turning knob in the behind of squeegee.
If solution is missed, reduce the amount of solution
flow and pull the machine back over the missed