97
© 2010 McNeilus Truck and Manufacturing, Inc.
Zero Radius Side Loader
Troubleshooting
1.0
Troubleshooting
When a problem or malfunction occurs, follow these steps.
The sequence below will help isolate the problem and often
permit a quick repair. If further assistance is required, refer
to the applicable section of this manual or call the McNeilus
factory Service and Parts number at 888-686-7278.
N O T E
Isolate the problem before taking any
remedial actions.
1.
Unless further damage will occur, repeat the steps that
caused the problem. Refer to the OPERATION section
of this manual to be sure that the correct operating
procedures have been followed. Often a simple step in
the standard operating procedure has been forgotten.
2. Refer to the Troubleshooting Chart. It is designed to
help you troubleshoot problems at your location, and
is organized in a logical sequence. Look under the
appropriate equipment section, and for the specific
problem within the chart.
3.
Perform the checkout procedure and remedial actions
listed within the chart to isolate the problem.
4.
If your particular problem is not listed, or the remedial
actions provided do not resolve the problem, we suggest
that you take the vehicle to a service shop, refer to the
appropriate service manual or contact McNeilus Truck
and Manufacturing, Inc. for service assistance.
5.
If you have questions or need help, please call the
McNeilus factory Service and Parts number at 888-686-
7278.
