www.mcohome.com User Manual
MCOHome Technology Co., Ltd 2013
1
Touch Panel Switch
MH-S513-US
Introduction
MCOHome Touch Panel Switch is a wall switch with built-in Z-Wave module. It supports basic
command class
，
multi channel command class and multi channel association command class, which
can control all associated devices synchronously. This product can be included and operated in any
Z-Wave network with other Z-Wave certified devices from any other manufacturers.
Specifications
Power supply: AC120V, 60Hz
Frequency: 908.42MHz
Max load: 5A each channel
Load type: Incandescent, Fluorescent, Ballast, Motor, CFL
Installation Instructions
IMPORTANT:
A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete the installation inside the main circuit box (normally outside your house)
Read all instructions and documentation and save for future reference
Step1 Preparing
CAUTION:
Cut off power supply at circuit breaker or fuse before installation to avoid fire, shock or
death!
Step2 Wiring
1. Connect Hot Line to “L”.
2. Connect Neutral Line to “N”.
3. Connect Load wire to “L1--L3”.
