IM 676
39
Control center layouts
ALR 080E through 185E
Figure 13, Left side, 115V control section
Figure 14, Right side, high voltage power
section
Note: PB1, PB2, PB3 are used with multiple point power wiring
Figure 15,Recommended field installed unit disconnect location
Note: Mount disconnect on stationary panel so it does not interfere with hinged doors or
with air intake into coil.
Stationary Panel
Disconnect Switch
9.5"
(241mm)
Min.
Power
Into
Unit
Hinged Doors on
Control Center
6" (152mm) Min.