1-6
Indoor Unit
Cool
Air
Ceiling Board
Panel
Air Leak
Good Installation
Bad Installation
NOTE
Install the front frame panel firmly to prevent cool air leakage which will cause condensation and water dripping.
Cool
Air
Air Leak
Ceiling Board
Panel
Air intake grille installation
•
Before installing the air intake grille, be sure to fix the ionizer
filter to the air filter.
•
Install the air intake grille together with the air filter to the
front panel.
•
The grille can be fit in any direction, when selecting direction,
the ceiling design and grille operability should be considered.
•
If the unit comes with ionizer filter (optional item), make
sure to fix the ionizer filter to the air filter before installing
the air intake grille.
•
Fix the ionizer filter to the air filter with the black side on top
and white side at bottom.
•
Carefully clip on the ionizer filter frame.
Frame
(Optional Item)
Ionizer Filter
(Optional Item)
Filter
(Standard)
INSTALLATION OF THE OUTDOOR UNIT
Preliminary site survey
•
A place protected from rain, direct sunlight and well-ventilated wherever practicable.
•
A place capable of bearing the weight of the outdoor unit and isolating noise and vibration.
•
A place where there are no obstruction of air flow into or out the unit.
•
Do not put any object which may become obstacle for the air flow into or out the outdoor unit.
•
The location must not be susceptible to high concentration dust, oil, salt or sulfide gas.
SL series
A
B
C
D
Min. distance (mm)
300
1000
300
500
Outdoor unit installation
•
Install the outdoor unit firmly and horizontally. Maintain a space clearance from the obstruction as shown in below for
servicing and air ventilation.
A
B
C
D
Summary of Contents for IM-CKA-0501 A Series
Page 2: ......
