22
3-DRAWINGS AND TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
AKI Hydromatic 24 M1
Energy Efficiency Class
A+
Nominal output power
23.9 kW (20554 kcal/h)
Nominal power output (H
2
O)
18.6 kW (15996 kcal/h)
Minimum output power
4.5 kW (3870 kcal/h)
Minimum power output (H
2
O)
3.0 kW (2580 kcal/h)
Efficiency at Max
92.0%
Efficiency at Min
95.6%
Temperature of exhaust smoke at Max
151 °C
(1)
Temperature of exhaust smoke at Min
62°C
(1)
Particulate / OGC / Nox (13%O
2
)
12 mg/Nm3 - 3 mg/Nm3 - 108 mg/Nm3
CO at 13% O
2
at Min and at Max
0.023 – 0.008%
CO
2
at Min and at Max
7.9% - 14.7%
Smoke mass
12.5 g/sec
Max operating pressure
2,0 bar - 200 kPa
Recommended draught at Max power ***
0.10 mbar - 10 Pa***
Minimum draft allowed at Min power
0.02 mbar - 2 Pa
Hopper capacity
40 litres
Type of pellet fuel
Pellet diameter 6 mm and size 3÷40 mm
Pellet hourly consumption
Min ~ 1.0 kg/h* - Max ~ 5.3 kg/h*
Autonomy
At min ~ 26 h* - At max ~ 5 h*
Heatable volume m
3
514/40 – 587/35 – 685/30 **
Combustion air inlet
Ø 50 mm
Smoke outlet
Ø 80 mm
Air inlet
80 cm2
Rated electrical power (EN 60335-1)
115 W (Max 370 W)
Supply voltage and frequency
230 Volt / 50 Hz
Net weight
190 kg
Weight with packaging
210 kg
Distance from combustible material (back/side/under)
20 / 200 / 0 mm
Distance from combustible material (ceiling/front)
750 / 1000 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 40-35-30 Kcal/h per m
3
)
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011)
(1)
To properly size the chimney (in accordance with EN 13884-1), use the smoke temperature exactly detected at the
outlet of the appliance, or the above stated temperature increased by 20% (e.g. stated temperature 100°C: product outlet
temperature 120°C)