CSP
−
902RFM207E
−
1
ROTORCRAFT FLIGHT MANUAL
MD900 (902 Configuration with PW 207E)
Normal Procedures
FAA Approved
Reissue 2
Revision 1
4
−
9
Fan air inlet screen and duct
CHECK CLEAR
Notar fan blades
CHECK
ROTOR SYSTEM
Stationary swashplate
CHECK
Lower control rodend bearings
CHECK
Rotating swashplate
CHECK
Scissors drive link
CHECK
Pitch change links
CHECK
Striker plates and rollers
CHECK
Inner flexbeam attach points
CHECK
Flexbeam lead and lag legs
CHECK
Upper and lower damper and damper caps
CHECK
Elastomeric feathering bearing
CHECK
Pitch change housing
CHECK
Blade attach pins (bolts):
Check for upward or downward shift of
installed blade retention bolts.
ADVISE MAINTENANCE IF SHIFT IS
NOTED
Check blade retention bolts for gap be
tween thrust washer and retainer.
ADVISE MAINTENANCE IF NO GAP IS
PRESENT
Blade attach points
CHECK
Rotor blades
CHECK
Top of rotor head
CHECK
Summary of Contents for MD900 Explorer
Page 4: ......