CSP
−
902RFM207E
−
1
ROTORCRAFT FLIGHT MANUAL
MD900 (902 Configuration with PW 207E)
Normal Procedures
FAA Approved
Reissue 2
Original
4
−
11
Thruster rotating cone:
CHECK FOR FREEDOM OF ROTATION
Place hands at the 11 and 5 o'clock positions and press inward while rotating the
cone to the left and right. Repeat check by using the 1 and 7 o'clock positions. Ad
vise maintenance if any unusual noise or roughness is noticed.
CAUTION: Do not rotate cone beyond one
−
half left/right open.
Turning vanes
CHECK
TAILBOOM AND EMPENNAGE
−
LEFT SIDE
Horizontal stabilizer:
Horizontal stabilizer attach points
CHECK
Horizontal stabilizer fairing
CHECK
Antennas
CHECK SECURITY/ATTACHMENT
Tail skid
CHECK
Vertical stabilizer
CHECK
Nav light
CHECK
Tailboom
CHECK CONDITION
Tailboom attach ring
CHECK
LEFT REAR FUSELAGE
Fuselage skin
CHECK
Exhaust ejector cowl
CHECK
Work platforms/steps
CHECK
External power door, (aft mounted battery
only)
SECURITY, CONDITION
Antennas/externally mounted equip
ment
CHECK SECURITY/ATTACHMENT
Summary of Contents for MD900 Explorer
Page 4: ......
