CSP
−
902RFM207E
−
1
ROTORCRAFT FLIGHT MANUAL
MD900 (902 Configuration with PW 207E)
Normal Procedures
FAA Approved
Reissue 2
Revision 2
4
−
23
Lighting control panel:
LT MSTR
AS REQUIRED
CONSOLE/IIDS/FLOOD/INSTR
AS DESIRED
STROBE(S)/POSN/AREA
AS DESIRED
NOTE
:
If white strobe lights are installed, the “BOTH” or “WHITE” switch positions are
to be used during daytime operations only. (Ref. Figure 4
Electrical master panel:
Avionics
AS DESIRED
L GEN and R GEN
ON (OFF FOR GPU
START)
POWER
OFF
Fuel system panel:
L BOOST AND R BOOST
OFF
LEFT/RIGHT FUEL SHUTOFF
ON; COVER CLOSED
Engine control panel:
L ENGINE and R ENGINE
OFF
ELECTRICAL POWER
−
ON
Electrical master panel:
POWER
BAT/EXT
NOTE
:
If helicopter has the aft battery option, the yellow GPU light will be ON when a
GPU is used for electrical power.
IIDS:
Monitor BIT
FIRE WARNING ANNUNCIATORS
ON FOR 2 SECONDS; CHECK IIDS
FOR ADVISORIES
NOTE
:
Perform a commanded IIDS BIT if the helicopter has been statically exposed to
temperatures below 0
°
C for 12 hours or longer.
Fuel quantity display
CHECK
DISP (display by exception)
AS DESIRED
Summary of Contents for MD900 Explorer
Page 4: ......
