Optional Equipment
Removable Copilot Controls
CSP
−
902RFM207E
−
1
ROTORCRAFT FLIGHT MANUAL
MD900 (902 Configuration with PW 207E)
FAA Approved
Reissue 2
Original
10
−
49
10
−
11. OPERATING INSTRUCTIONS: REMOVABLE COPILOT CONTROLS
PART I
GENERAL
The Removable copilot controls allows the aircrew to change their cockpit configura
tion from dual to single controls and back to dual, as desired, without the use of
tools.
PART II
LIMITATIONS
Flight crew:
Single pilot operation from the copilot seat is not approved with removable copilot
controls installed.
Placards:
NO SINGLE PILOT OPERATION
USING THIS CONTROL STICK
Figure 10
−
18. Collective and Cyclic Placards
PART II
LIMITATIONS
No change.
PART IV
NORMAL PROCEDURES
Copilot cyclic stick removal (Ref. Figure 10-19):
Pull back hook tape fasteners (Velcro) and remove cyclic boot.
Detach P1 connector from receptacle on bulkhead.
Detach bonding jumper.
Remove quick release expandable bolts from from cyclic. Slide cyclic forward
to remove.
Remove protective cover or jumper plug from adjacent dummy receptacle and
install it on J143.
Reinstall cyclic boot.
Summary of Contents for MD900 Explorer
Page 4: ......